WIDE ANGLE MIRROR SKIDSTEER Equipment Loader Skid Steer Fits cat bobcat gehl etc

We are VERY sorry for any inconvenience this may cause and thank you for your understanding. Our company, PC Sales & Service has grown so we have now opened this new division. We are now in the 4. We are proud of and stand behind all our products 100%. THESE ARE A VERY HIGH QUALITY WIDE ANGLE TRUE GLASS MIRROR IN RUBBER MOUNT WITH A STAINLESS STEEL HOUSING. Please take a moment to read through our stack of feedbacks to see what our previous customers think about them. THEY ARE BUILT TO LAST TO GIVE YOU YEARS OF SERVICE. THEY HAVE A "SWING STYLE" MOUNT so you can easily tilt them UP AND OUT OF YOUR WAY if needed so you won't have to duck to try to avoid banging your head every time you get in and out of machine. They also mount UP HIGH to the roof, where they belong, not in the way on the machine's cross member.

FACT : We have been offering the se for well over 10 years and in that time we have seen MANY cheap "Copy Cats" come and go, all we ask is that you please be sure you are comparing apples to apples... Stainless steel housing, Stainless Steel nuts & bolts, Stainless steel brackets.... Or cheap tin that will rust or plastic the dries out and cracks? Swing style mount so don't bang your head or have to duck........

Or solid mount stuck in your way all the time? TRUE REAL GLASS convex mirror so you will always have A SUPER CLEAR VIEW.... Or a cheap plastic lens that fades, scratches and YELLOWS?

Glass mirror with a rubber mount set into stainless steel housing and solid stainless steel bracket to hold it steady while also protecting it from vibrations of machine...... Or cheap flimsy plastic or thin tin mount that vibrates? NO DRILLING: Our mirrors DO NOT just slap onto your machine with a couple of sheet metal screws.... We include a stainless steel backing bracket along with stainless steel nuts and bolts that clamp thru the cage of your mahine so that NO DRILLING INTO YOUR EXPENSIVE MACHINE!! PLEASE READ BELOW FOR A COMPLETE AND FULL DESCRIPTION, THANK YOU....

And we are always more then happy to answer questions! This is our special way of celebrating over 28 years in business and our 16. THANK YOU again and heres to a prosperous and SAFE work season for everyone!!! With all mounting hardware and brackets included. This is an extremely high quality GLASS, 4 inch x 8 inch convex mirror which provides a very sharp, clear view (NOT plastic so they will NOT yellow and scratch and loose clarity) and it is set in a rubber mount for shock & vibration resistances, plus it has a STAINLESS STEEL housing (not tin so they will not rust out).

The mirror pivots forwards and backwards on its "swing style" mount and can be adjusted left or right with the main back mount for the best rear view angle positioning. Once you position and aim the mirror to your taste, our mount style allows you to completely LOCK in that position (if so desired) so that it will not loose it's adjusted view from the constant vibration and bouncing around that anyone who operates a skid steer is well aware of. The MOUNTING BRACKET and the BACKING BRACKET are also made from STAINLESS STEEL, as are ALL of the nuts, washers and bolts. TOP QUALITY + STAINLESS STEEL HOUSING & HARDWARE = LONG LIFE & NO RUST! This mirror will give you years of service and always look great.

This high quality mirror comes with all the needed hardware to mount it to your machine (4 bolts, 2 nuts, 2 lock washer, 2 locking nuts, plus a backing plate and complete instructions). The bracket is designed to clamp thru the grate on the top of the cage of the machine so no drilling is required and the only tools you will need to install them are a couple of 7/16 wrenches.... And of course for machines without a cage it can also be mounted solid by screwing it directly to any desired location (please note, we provide all stainless steel nuts and bolts for attaching the mirror to the cage but if you decided to screw it directly to another location then you will need to provide a couple of your own sheet metal screws). The mounting bracket is designed for machines without glass enclosures or for machines that are equipped with a glass enclosure as long as the glass is approx.

3/4 ABOVE the overhead cage. If the glass is 3/4 above the cage you will be able to mount the mirror without glass removal. This mirror will greatly help reduce the blind spots for safety and they will give you a nice wide rear viewing area.

It is also ISO9001/QS9000 certified. Please check out our other auctions for our double "side mount" rear-view mirrors as well as our combo sets. THANKS for looking and GOOD LUCK. The item "WIDE ANGLE MIRROR SKIDSTEER Equipment Loader Skid Steer Fits cat bobcat gehl etc" is in sale since Monday, January 2, 2012. This item is in the category "Business & Industrial\Heavy Equipment Parts & Accs\Farm Implement Parts".

The seller is "reserveless-auctions" and is located in North Carolina. This item can be shipped worldwide.

Implement Use: Construction
Make: Fits all brands
Product Type: Mirrors
Implement+Use: Farm
Attachment Type: Skid Steers
Model: all
Model Year: all
Type: Stainless Steel
Equipment Type: Skid steer Backhoe Dozer
MPN: 4x8 Wide
Brand: Fits Bobcat New Holland etc.
Equipment Make: Fits All Types